The tools and equipment required for major maintenance of sewage mixers mainly include the following categories:

First, basic tools

Wrench: Used to remove and tighten bolts and nuts on the device.

Screwdriver: Used to remove and install screws, especially those used to secure electrical and mechanical components.

Pliers: Used to grip and turn small parts, and to handle wires and cables, etc.

Hammer: Used to knock and loosen tight parts, and to adjust certain positions of equipment.

Measuring tools: such as vernier calipers, dial indicators, etc., used to measure the size and wear of equipment.

Second, professional tools and equipment

Hoisting equipment, such as cranes or hoists, used to remove and install the heavy parts of the mixer, such as the mixing shaft and the mixing paddle.

Cleaning equipment: such as high pressure water gun, cleaning agent, etc., used to clean the inside and outside of the mixer, especially the mixing tank and the mixing blade and other easily contaminated parts.

Lubrication equipment: such as oil gun, butter gun, etc., used to add lubricating oil or grease to the bearing, gear and other parts of the equipment.

Detection instruments: such as vibration sensors, noise meters, etc., used to detect the vibration and noise of the equipment, as well as to evaluate the operating status of the equipment.

Special tools: such as bearing removal tools, seal installation tools, etc., these tools are specifically designed for mixers to remove and install specific parts.

Third, safety equipment

Personal protective equipment: such as safety glasses, gloves, protective clothing, etc., to protect the safety of the operator.

Safety warning signs: In the maintenance process, safety warning signs need to be set to remind other personnel to pay attention to the status of the equipment.

Fourth, other auxiliary equipment

Service bench: Used to place disassembled parts and perform simple service and assembly work.

Tool cart: used to store and transport tools and equipment required for maintenance, as well as record relevant information during maintenance.

In summary, there is a wide variety of tools and equipment required for the maintenance of sewage mixers, and it is necessary to choose according to the specific maintenance content and equipment model. When performing major maintenance, it is important to ensure that all tools and equipment meet safety standards and are operated in strict accordance with the equipment manufacturer's maintenance manual.

Nanjing LanJiang Water Treatment Equipment Co.,Ltd manufactures equipment for wastewater treatment. We were established in 2001. Since then, we designed and produced submersible mixers, top entry mixers, aerators and other wastewater treatment equipment.