The time of sewage treatment is not a fixed value, it is affected by a variety of factors, including the scale of treatment, treatment process, water quality standards and treatment effect requirements. Here is a detailed analysis of how these factors affect the treatment time of sewage mixers:

Processing scale:

Treatment scale refers to the amount of sewage that needs to be treated. In large-scale sewage treatment plants, due to the large amount of sewage that needs to be treated, the entire treatment process, including the working time of the sewage mixer, may be relatively long. In contrast, small-scale sewage treatment systems, due to their small capacity, may be able to complete treatment in a shorter period of time.

Treatment process:

Sewage treatment usually includes steps such as primary treatment, secondary treatment and advanced treatment, each of which takes a certain amount of time. The sewage mixer mainly plays a role in the primary treatment stage or when used in conjunction with other treatment units, promoting the contact between impurities in the sewage and treatment agents or microorganisms by stirring, and accelerating biochemical reactions. Different processing processes will have different requirements for mixing time.

Water quality standard:

The water quality standard of the treatment target will also affect the working time of the sewage mixer. If the wastewater needs to be treated to higher water quality standards, it may be necessary to increase the mixing time or cooperate with other treatment units for longer treatment times.

Treatment effect requirements:

Sometimes, there are higher requirements for treatment effectiveness, such as the need to achieve higher removal rates or lower concentration limits. This may require the sewage mixer to stir for a longer period of time to ensure that the treatment results are as required.

In addition, the mixing time of the sewage mixer is also affected by factors such as equipment performance, operation mode and maintenance status. In practical application, it needs to be adjusted and optimized according to the specific situation.

To sum up, the time range of sewage treatment by sewage mixers can range from a few minutes to a few hours, depending on the combination of the above various factors. Therefore, it is not possible to give a fixed processing time. In actual operation, it should be evaluated and designed according to factors such as treatment scale, treatment process, water quality standards and treatment effect requirements to determine the appropriate mixing time.

Nanjing LanJiang Water Treatment Equipment Co.,Ltd manufactures equipment for wastewater treatment. We were established in 2001. Since then, we designed and produced submersible mixers, top entry mixers, aerators and other wastewater treatment equipment.