The time required to treat 1 cubic meter of sewage is not a fixed value, and it is affected by a variety of factors, including the nature of the sewage, the model and power of the mixer, and the design of the treatment process. Therefore, it is impossible to give an exact time. However, it is possible to refer to some common sewage treatment equipment and processes to roughly estimate the treatment time.

In general, sewage treatment equipment such as the WSZ series, its treatment capacity is usually expressed by how many cubic meters of sewage are treated per hour. For example, the WSZ-AO-1 equipment can treat about 1 cubic meter of sewage per hour, while the WSZ-AO-4 equipment can treat 4 cubic meters of sewage per hour. This means that for these devices, the time to treat 1 cubic meter of sewage is between about 15 minutes and 1 hour, depending on the model and power of the device.

Please note, however, that The Times provided here are for reference only. In practical applications, the treatment time may vary due to the water quality, temperature, pH value and other factors of the sewage. In addition, the sewage mixer is usually only one link in the sewage treatment process, and the entire treatment process may also include other steps, such as precipitation, filtration, disinfection, etc., which will also affect the total treatment time.

To sum up, to accurately determine the time required for the sewage mixer to treat 1 cubic meter of sewage, it is necessary to consider the specific equipment model, treatment process and water quality of the sewage. In practice, it is recommended to refer to the processing capabilities and operating guidelines provided by the equipment manufacturer to determine the best processing time.