The operation process of sewage mixer can be summarized as the following steps:

1. Prepare

①. Check whether the components of the sewage mixer are firmly installed and ensure that the import and export pipes are unobstructed.

②. Check whether the power line is normal, and confirm that the wiring of the motor and the control box is correct.

3. Clean up the debris and oil around the sewage mixer to ensure the safety of the operating environment.

④. Confirm that the sewage tank or treatment equipment to be stirred is ready and filled with water or sewage.

2, boot operation

①. Turn on the power switch, start the control box, and ensure that the power indicator is on.

②. Press the start button to start the sewage mixer. Pay attention to observe whether the machine starts smoothly and whether there is abnormal sound.

3. According to the nature of sewage and mixing needs, adjust the speed and mixing time of the mixer to achieve the best mixing and mixing effect.

3. Operation and maintenance

1. During the operation of the mixer, it is necessary to closely observe its operating state. If anomalies or faults are found, they should be stopped immediately and checked.

2. Regularly check the key parts of the motor, reducer, bearing, belt and so on of the sewage mixer. If there is wear or damage, it should be replaced in time.

(3) Regularly clean the inside and outside of the sewage mixer to keep the equipment clean and hygienic to extend the service life.

4. Stop operation

①. When the mixing task is completed or it needs to be stopped, the mixer should be turned off first.

②. Turn off the power switch and ensure that the mixer stops running completely.

③. Clean up the debris and oil around the equipment to keep the site clean.

5. Safety precautions

①. In the process of operation, safety operation procedures should be strictly observed to avoid accidental injuries.

②. The operator should wear the appropriate protective equipment, such as safety helmet, gloves, etc.

③. Do not touch the rotating parts with hands or tools when the mixer is running, to prevent injury from involvement.

When cleaning or maintaining the equipment, ensure that the power supply is completely cut off and take necessary protective measures.