Mixers (especially concrete mixers) need to avoid the following risk factors during transportation to ensure the safety and smooth progress of transportation:

First, mechanical failure

Regular inspection and maintenance: Regular inspection and maintenance of various parts of the mixer, including electrical system, transmission system, mixing shaft and blade, etc., to ensure that the equipment is in good condition.

Prevent overload: Avoid overload operation of the mixer to prevent overheating of the motor, damage to the transmission components and other failures.

Second, improper operation

Correct operation: Strictly follow the operation rules to avoid equipment damage or accidents caused by misoperations or improper operations.

Monitor the running state: monitor the running state of the mixer in real time during transportation, such as temperature, speed, vibration, etc., and deal with anomalies in time.

Third, road surface and environmental factors

Road condition adaptation: Be familiar with the transport road conditions, choose the right route and speed, and avoid driving on bumpy or dangerous sections.

Weather changes: Pay attention to weather changes, such as wind, rain, snow, thunder and other bad weather should be suspended transport to ensure safety.

Fourth, safety devices and protection

Check the safety device: ensure that the safety device of the mixer (such as the emergency stop button, limit switch, etc.) is in good condition and effective, and can be stopped in an emergency.

Protective measures: Take necessary protective measures, such as wearing protective equipment, setting warning signs, etc., to ensure the safety of personnel and equipment.

Fifth, specific risk factors and countermeasures

Mixing tank stop:

Reason: Long time stop may lead to concrete condensation, impact on the hydraulic system, reducer.

Countermeasures: Keep the mixing tank rotating at a low speed during transportation to prevent concrete condensation.

Vehicle rollover:

Reason: The center of gravity of the mixer is high, and too fast or improper operation may lead to rollouts when turning.

Countermeasures: Reduce the speed when turning, adjust the speed of the mixing tank, and keep the vehicle stable.

Brake failure:

Cause: Brake system failure or improper operation.

Countermeasures: Check the brake system regularly to ensure good braking performance; Use the brakes properly during driving to avoid emergency braking.

Water shortage in tank:

Cause: The water level of the water tank is not checked in time, resulting in a lack of water.

Countermeasures: Check the water level of the water tank regularly to ensure that the water tank is sufficient; Pay attention to water temperature changes during transportation to prevent overheating.

Concrete quality problems:

Reason: concrete collapse does not meet the requirements, transportation time is too long.

Countermeasures: Ensure that the concrete collapse meets the requirements; Keep the mixing tank rotating during transportation; Control transit time to avoid concrete segregation.

To sum up, the blender needs to avoid risk factors such as mechanical failure, improper operation, road surface and environmental factors during transportation. Through regular inspection and maintenance, proper operation, adaptation to road conditions and the environment, ensuring that safety devices are intact and taking specific countermeasures, the safety and smooth transportation of mixers can be ensured.

Nanjing LanJiang Water Treatment Equipment Co.,Ltd manufactures equipment for wastewater treatment. We were established in 2001. Since then, we designed and produced submersible mixers, top entry mixers, aerators and other wastewater treatment equipment.