Maintenance knowledge of sewage mixer

As an important equipment in the sewage treatment process, the maintenance of the sewage mixer is very important. The following is detailed knowledge about the maintenance of sewage mixers:

1. Daily cleaning work

Clean the inside and outside surfaces of the mixer regularly to remove dirt and residue and keep the equipment clean.

2, lubrication maintenance

Add or replace the lubricant regularly according to the equipment instructions or the cycle recommended by the manufacturer to ensure the normal operation of the parts of the mixer.

3, fastener inspection

Periodically check whether fasteners such as bolts and nuts are loose, and tighten them in a timely manner to prevent vibration or fault during device operation.

4. Operation status monitoring

Pay attention to observe whether the sound and vibration of the mixer are normal, and deal with it in time if any abnormal situation is found.

5, seal inspection

Check the seal of the mixer regularly to ensure that it is well sealed to prevent sewage leakage.

6, filter cleaning

Clean the filter regularly to avoid clogging and ensure the smooth flow of sewage.

7, belt or chain adjustment

Regularly check and adjust the tightness of the belt or chain to ensure that the transmission is normal and prevent the operation efficiency of the mixer from being too loose or too tight.

8, electrical system inspection

Regularly check electrical system components such as wires and plugs to ensure safety and reliability and prevent electrical failures.

9. Calibrate the instrument regularly

The relevant instruments of the mixer are calibrated regularly to ensure the accuracy of the measurement.

10. Record and maintenance

After each maintenance, record the maintenance information in detail, including the maintenance time, content, and parts to be replaced, to facilitate follow-up tracing and fault analysis.

11.Training and operation

Regular training for the operator, so that they understand the maintenance knowledge and operation points of the mixer, to ensure the correct use of equipment.

12. Check the motor and mixing shaft regularly

Regularly check the insulation performance, temperature rise and other parameters of the motor to ensure the normal operation of the motor; At the same time, check the mixing shaft and blade for wear, deformation and other conditions, and timely maintenance or replacement.

To sum up, the maintenance work of the sewage mixer involves many aspects and needs to be carried out regularly and strictly. By doing these maintenance work, the service life of the sewage mixer can be extended, the efficiency of sewage treatment can be improved, and the stable operation of the equipment can be ensured.