The use of mixers varies depending on the specific model and application scenario, but in general, the following basic steps and precautions can be followed:

First, preparation before use

Safety check:

Ensure the safety of the mixer and its surroundings, and check the equipment for damaged or loose parts.

Check whether the power cable is intact, not damaged or exposed.

Ensure that the mixer is securely installed to avoid displacement or tipping due to vibration.

Choose the right container:

Select the appropriate container according to the nature and amount of the mixing material to ensure that the container has sufficient capacity and stability.

The container should be placed on a stable ground to prevent tipping during mixing.

Preparation Materials:

Prepare the required materials according to the recipe or operation requirements, and ensure the cleanliness and quality of the materials.

Second, start and operation

Connect the power supply:

Connect the mixer properly to the electrical outlet to ensure that the power supply is stable.

Start the mixer:

Turn on the power switch of the mixer and start the equipment.

Adjust the speed and time of the mixer as needed to ensure that the desired mixing effect is achieved.

Feeding and mixing:

Add materials to containers in the correct proportions and order.

Start the blender and start mixing. During the mixing process, it is necessary to observe the mixing effect at all times to ensure that the mixing is uniform and that there are no problems such as liquid swirling.

Adjust the mixer speed and mixing time according to the need to meet the process requirements.

Third, shutdown and cleaning

Halt:

After mixing, first set the mixer speed to the lowest setting, and then turn off the power switch.

Turn off the power and make sure the blender stops running completely.

Clear up:

Drain the residue from the mixing container and clean the equipment and container.

Pay attention to clean up the mixing paddle, the inner wall of the container and other places where materials are easy to remain, and ensure that the equipment is clean and sanitary.

Fourth, precautions

Safe operation:

When operating the mixer, pay attention to safe operation to avoid hands or clothes being mixed into the mixer.

Do not put your hand into the running blender to avoid accidental injury.

Choose the right mixer and mixing speed:

Select the appropriate mixer and mixing speed according to the nature of the mixing material to avoid uneven mixing or material damage due to too fast or too slow mixing.

Regular maintenance and maintenance:

Regularly check the running state of the mixer and whether the parts are in good condition, such as abnormal maintenance and replacement in time.

After each use, the mixer is cleaned and disinfected to maintain the hygiene and performance of the equipment.

Follow the operating procedures:

When using the mixer, the user must operate in strict accordance with the operating procedures to ensure the long-term stable operation of the equipment and improve work efficiency.

Please note that the above steps and precautions are for reference only, and the specific use method needs to be adjusted according to the model of the mixer, the operating manual provided by the manufacturer and the actual application scenario.

Nanjing LanJiang Water Treatment Equipment Co.,Ltd manufactures equipment for wastewater treatment. We were established in 2001. Since then, we designed and produced submersible mixers, top entry mixers, aerators and other wastewater treatment equipment.