Nanjing LanJiang Water Treatment Equipment Co.,Ltd manufactures equipment for wastewater treatment. We were established in 2001. Since then, we designed and produced submersible mixers, top entry mixers, aerators and other wastewater treatment equipment.

The installation of a sewage mixer requires the use of a range of tools, the selection and use of these tools is essential to ensure that the installation process goes smoothly and the stable operation of the mixer. Here are some common installation tools and their functions:

First, power tools

Electric screwdriver:

Function: Mainly used to disassemble and install the foundation fixing bolt of the mixer. The electric screwdriver has the torque adjustment function to ensure that bolts are properly tightened to avoid device faults caused by too tight or too loose.

Note: Select the right screwdriver head according to the size of the bolt head, and adjust the torque as required.

Power wrench:

Function: Used to remove and install large bolts, especially the bolts of the transmission system, motor and hydraulic system of the mixer. The power wrench has a strong torque output and can quickly complete the tightening work of large bolts.

Note: It is necessary to adjust the torque of the wrench according to the size and strength of the bolt to ensure the tightening effect of the bolt.

Static wrench:

Function: Mainly used to tighten small bolts, such as the support frame of the mixer and the bolt of the guard and other accessories. Static wrenches provide precise torque control to ensure proper bolt tightening.

Note: It is also necessary to adjust the torque of the wrench according to the size and strength of the bolt.

Second, hoisting equipment

Crane or crane:

Function: Due to the size and weight of the stand mixer, it is necessary to use lifting equipment such as cranes or cranes to safely lift it to the predetermined position.

Note: When selecting the lifting equipment, it should be ensured that its carrying capacity and stability can meet the requirements of the mixer to avoid accidents during the lifting process.

Third, measuring tools

Level:

Function: Used to check the levelness of the mixer after installation to ensure that it remains stable during operation. The accurate measurement of levelness is very important for the normal operation of the mixer.

Note: When using the level, it should be placed in different positions of the mixer for measurement to ensure the accuracy of the overall levelness.

Tape measure, vernier caliper, etc. :

Function: It is used to accurately measure the size and installation position of each component of the mixer to ensure the installation accuracy of the equipment.

Fourth, other auxiliary tools

Manual hoist:

Function: During the lifting process, the manual hoist can be used as an auxiliary tool to help adjust the position and Angle of the mixer.

Note: When using the manual hoist, ensure that the hook is firm, the chain is not damaged, and comply with the safe operating procedures.

Wrench, hammer, screwdriver, etc. :

Functions: These tools play an important role in the installation process and can help complete some minor adjustments and fixing work.

Fifth, safety equipment

Safety helmet, protective glasses, protective gloves, etc. : When performing installation work, all relevant personnel should wear necessary safety equipment to prevent accidental injury.

To sum up, the installation of the sewage mixer requires the use of a variety of tools and equipment, including electric screwdriver, power wrench, static wrench and other power tools; Hoisting equipment such as cranes or cranes; Level, tape measure and other measuring tools; Manual hoist, wrench and other auxiliary tools; And the necessary safety equipment. When using these tools and equipment, safe operating procedures and manufacturer's installation guidelines should be strictly followed to ensure the smooth installation process and stable operation of the mixer.