News

  • Floating installation method of the aeration mixer buoyancy unit

    Floating pontoon suspension changes the game for aeration mixers. Instead of bolting everything to a fixed base on the tank floor, you let the mixer float at a set depth using buoyancy modules. No pre-buried concrete. No anchor bolts. No digging up a slab when something goes wrong.
    Read more
  • Installation requirements for the pre-installed base of the aeration mixer

    The pre-buried base is the foundation of every aeration mixer installation. If the base is wrong, everything above it is wrong. Cracked concrete, shifted bolts, uneven elevation — these are not minor inconveniences. They destroy oxygen transfer efficiency, shorten equipment life, and turn a simple retrofit into a nightmare.
    Read more
  • Standard for the inclination installation angle of the aeration mixer

    Most people focus on spacing when installing aeration mixers. Nobody talks enough about tilt angle. That is a mistake. The angle at which a mixer sits in the tank determines how bubbles rise, how the flow field spreads, and whether your dissolved oxygen stays uniform across the whole basin. Get the angle wrong and you get short-circuiting, dead zones, and wasted air.
    Read more
  • Proper planning of the installation spacing for the aeration mixer

    Getting the spacing right for aeration mixers is not a detail you can afford to overlook. Too wide, and oxygen transfer efficiency drops — your microorganisms starve. Too tight, and you waste energy, money, and headache. The sweet spot lives in a narrow band, and finding it demands real engineering logic, not guesswork.
    Read more
  • Specification for the connection of aeration mixers used in series

    Connecting aeration mixers in series sounds like a simple idea — put one after another along the flow path, let the first unit push water into the second, and so on. In theory, the mixing energy stacks up. In practice, series connections fail more often than parallel arrays because the interaction between units is far more complex. The downstream mixer sees disturbed water, not clean water. The up
    Read more